|
|
 DIY
G Sedan Engine Control System
2009-2011 Infiniti G37 Sedan Accelerator Pedal Released Position Learning Procedure
2009-2011 Infiniti G37 Sedan Accelerator Pedal Released Position Learning Procedure
| Models: |
- 2009 G37 Sedan
- 2010 G37 Sedan
- 2011 G37 Sedan
|
Accelerator Pedal Released Position Learning is an operation to learn the fully released position of the accelerator pedal by monitoring
the accelerator pedal position sensor output signal. It must be performed each time harness connector of accelerator pedal position
sensor or Engine Control Module (ECM) is disconnected.
Instructions
- 1
Make sure that accelerator pedal is fully released.
- 2
Turn ignition switch ON and wait at least 2 seconds.
- 3
Turn ignition switch OFF and wait at least 10 seconds.
- 4
Turn ignition switch ON and wait at least 2 seconds.
- 5
Turn ignition switch OFF and wait at least 10 seconds.
|
